Gelok superabsorbent laminates for industrial applications provide an effective solution for absorption of a wide range of hazardous, non-hazardous, contaminated and other regulated wastes. The laminates will retain large volumes of condensate and aqueous liquid in radioactive waste and hazardous waste containers.
Gelok superabsorbent laminates for industrial applications are constructed with strong polyester fabric layers bonded with a high performance polyolefin adhesive, thereby preventing tearing and delamination when dry. All materials are non-biodegradable.
- Absorption of nuclear condensate
- Hazardous waste absorption
Gelok laminates are ultra thin and can therefore easily conform to various truck, trailer or pipe geometries. All materials are non-biodegradable and have a high absorbency thereby preventing leakage and complying with transport regulations. Additionally, Gelok superabsorbent laminates for industrial applications have been freeze-thaw tested giving surety of performance in harsh conditions.
Laminates for absorption of hazardous wastes can be tailor-made to suit specific applications with absorbencies up to 7,500 grams per meter squared of 0.9% saline solution. Rolls can be up to 52″ wide and lengths as required.
A typical low to medium absorption laminate constructed from a polyester non-woven and high performance adhesive
Typical absorbency of ~3,500 grams per square meter of 0.9% saline solution
A medium absorbency non-woven laminate, offering excellent fluid retention and tear resistance
Typical absorbency of ~6,000 grams per square meter of 0.9% saline solution
Contact Us for Technical Advice
Fill out the form below to order samples, get more information or leave feedback.
Please let us know if you have any questions, and your Gelok representative will reach out shortly.
- Pilot machine testing
- Research and development
- Experienced engineering/chemical staff
- Superabsorbent product design
- Equipment/system design
- Fully equipped laboratory
- Training and education (products and systems)
- Custom services as required
- Tensile strength
- Absorption rates
- Fluid retention
- Other testing as required
Gelok Laminate Slitting
- Widths from 1-1/2″ (38 mm) to 52″ (1321 mm)
- Untrimmed master roll at 54″ (1370 mm) or 50″ (1270 mm)
- 3″ (75 mm) OD core
- Standard OD 28″ (711 mm)